20 Responses to

1. Coleparmer says:
   30. January, 2007 at 18:04
   

   so let us test for you.

   What should we do ?

2. Eman says:
   31. January, 2007 at 00:29
   

   I think I could test it if You send me or I can download it here.

3. andy007 says:
   31. January, 2007 at 02:08
   

   Eman, I hope You can recover player if somethig goes wrong:)

   I’ll create test version of the firmware where change one of the existing menu item (for example PBC in preferences) and sent it to you. After your testing if all goes correct I’ll create final version of the firmware whrere I’ll add new menu item. Is it suitable?

4. Eman says:
   31. January, 2007 at 02:55
   

   I had made alive 2 times my “dead” Oppo 971 after flashing it with SigmaTek 600 and Oppo 981 firmware via CD.
   For every Oppo 971 customer: Caution! NONE of these firmwares above works with Oppo 971!
   BUT I could reflash my Oppo with a real Oppo 971 firmware via cable (& MTK Tool software on my PC)
   So I can try these experimental firmware (for test)

5. Eman says:
   31. January, 2007 at 02:57
   

   for your comment:
   it’s all right, you can send me the firmware with experimental 480p support.
   thanks in advance

6. andy007 says:
   31. January, 2007 at 05:41
   

   Eman, I sent test firmware this morning to you.

7. Eman says:
   31. January, 2007 at 06:51
   

   ok, I’ve just caught it.

8. ALcALoIDe says:
   31. January, 2007 at 19:49
   

   So, did it work????

9. Eman says:
   2. February, 2007 at 01:54
   

   It worsks not. I had tried many setup variations, but it didn’t help. I’m sorry. (Video1/Video2, 480p/576p)

10. andy007 says:
    2. February, 2007 at 02:21
    

    Eman, And what does it happen when you change PBC menu item on/off? Absolutely nothing?

11. Eman says:
    2. February, 2007 at 04:49
    

    If I turn it “on” I get “no signal”. It works not.
    If I leave it “off” then everything is ok.

12. andy007 says:
    2. February, 2007 at 05:50
    

    OK. So, something happens. Very good. Does your TV accept progressive scan on component from some other source than oppo? Just to be sure that this “no signal” actually means no signal:)

13. bfranck says:
    2. February, 2007 at 06:41
    

    Hi Andy007 and others,

    Andy, could you send me your beta firmware for test on my Optoma?

    Thanks.
    Ciao

14. Eman says:
    2. February, 2007 at 08:52
    

    Yes, progressive scan over component video out works by me with CyberHome CH-DVD635S (with the same LCD TV).

15. andy007 says:
    2. February, 2007 at 09:44
    

    OK. Than I think just did not find extra code that switched output off if there is progressive flag is set. I’ll continue to work on this.

16. guych says:
    18. February, 2007 at 10:00
    

    hi, can i please test the 480p firmware progressive output on component connection?

17. andy007 says:
    19. February, 2007 at 02:02
    

    guych, No you can not. Firmware still misses some initialization code. But I think I can add it in the future. Note that its not a high priority task for me.

18. mister_no says:
    21. February, 2007 at 11:31
    

    Hi,

    someone try to mod the firmware of DV981HD?????

    you want to make it in the future?

    Thanks

19. andy007 says:
    22. February, 2007 at 02:29
    

    mister_no,
    Neither DV981HD no its clone not sold in Russia. So definetely I do not mod firmware for it.

20. bfranck says:
    22. February, 2007 at 09:03
    

    Hi,

    andy007, do you know where is the code in 8032 for the faroudja chip?

Leave a Reply »

Please note that there are no spam comments on this forum. All comments are held for moderation before they appear on-line. There is no point to post spam advertisements on this site as nobody will ever see them!